Somebody could help me.
Here is my frustrated experience.
I got my DZ77GA-70K working good with windows 7 pro 64bits (but no license for this OS).
So yesterday I bought a genuine copy of win pro 8, after install win8 problems came out, win 8 wont boot with a bcd error.
I think was a problem with the UEFI and the forums says "check your BIOS", I did a factory defaults to my BIOS after reboot the nightmare begins.
Here is my hardware.
MoBo = Intel DZ77GA-70K
CPU = Intel i7-3770K
RAM = Corsair 16GB 8x2 CMD16GX3M2A1866C9
PSU = Corsair 600W CX600M
SDD = Samsung 540 500GB
HDD = Segate Barracuda 80GB@7200 rpm
DVD = HP DH-16DS
FAN = Cooler Master Hyper 212 EVO
I tried all combination to figure out how to get video again.
Here is the sequence for the POST display
15>14>21>34>12 all this number in less 5 seconds
*Diagnostic LEDs has steady light on MEM INIT and CPU INIT
I thought the RAM was the problem, but I tested in other PC and works great,
without the RAM I got three beeps and then reboots over and over again.
POST displays is 15>14>20
*Diagnostic LEDs has blinking light on MEM INIT
I tried the recovery bios, using no jumper and a USB I tried many times with 14 files, one by one on all back ports and guess what... no luck.
I'm very frustrated cause I supposed that buying an intel board it will all run flawlessly.