I Compiled the Poky Distribution. Now what?
I followed the very helpful instructions on Sergei's blog and finally got a compiled version of Poky. Unfortunately, it seems exactly the same as what is available in the SD card Linux download on the...
View ArticleClik here to view.
Configuring the /dev/ttyS0 Serial Port in Linux
While this information can be derived from Galileo GPIO documentation and might be available elsewhere in bits and pieces, I wrote this post for everyone's convenience:...
View ArticleBuild debian Linux distribution for Galileo board with debootstrap
Inspired by the blog from Bruce_Richardson about running debian on the Galileo board, I tried that as well. https://communities.intel.com/message/218148 Instead of copying a running debian distro, I...
View ArticleRunning full-fat linux distro on Galileo board.
As a software guy not used to playing much with hardware, I decided this weekend to try and set up the galileo so that I could do coding directly on the board - since it is a x86 PC after all....
View ArticleIntel WIDI Connection Problem to LG TV Set
Hello, i have a laptop ASUS with the following components: CPU: i7-3610QM GPU: HD4000 WLAN: INTEL Wireless-N 2230 The TV set is: LG 42LM620S + WiFi Dongle Both devices are in one...
View ArticleIntel Wireless AC 7260 Bluetooth stops working
I just bought an Intel NUC and had it running and working for a couple of days. Yesterday, I was streaming music to my bluetooth speakers and then it stopped. I checked device manager and bluetooth is...
View ArticleSCI/SMI GPI port Linux software support
Hello to all, i would like to ask you about possible experience or status of GPI port software support in Linux kernel.Latest NUC boards based with Haswell CPUs have system Custom Solutions Header...
View ArticleCut Edges on the TV display when connected by HDMI
Hi, How can I adjust the resolution of the screen when attached to a HAIER TV with HDMI cable? The edges are cut and I can't watch the whole screen.I've tried to adjust the resolution in the graphics...
View ArticleClik here to view.
Data Monster Documentation
Here is the pattern for a Data Monster (Attached). This current design is intended for a 12x24" sheet of 1/8" thick material (wood or acryllic) on a laser cutter.The KIT version creates four boards...
View ArticleIntel® Wireless-N 7260 - slows
Hi, I have a problem with Intel Wireless-N 7260. The card works just fine, but after a few minutes transfer slows down to about 4Mb/s (802.11n -> 802.11b?).I tried with all drivers and always have...
View ArticleNew D34010WYK does not work!! No HDMI output
Now I'm angry. I just installed new memory and SSD following the compatibility list. I connect up, switch on and NOTHING on the screen. I tried another cable from a device that works. Nothing. The...
View ArticleHD 4600 HDMI audio problem
Hi There, I have a Gigabyte GA-H87N-WIFI board, with an Intel Core i3 4340 processor (with HD 4600 graphics). My PC is set up as a home theatre PC, and I'm really struggling with audio issues that I...
View ArticleDrivers for Intel Dual Band Wireless-AC 7260 Card?
Just put a new system together and installed an Intel Dual Band Wireless-AC 7260 in it. Used Windows 8 Pro. x64. I cannot find drivers for the Intel Dual Band Wireless-AC 7260. Anyone know where I...
View ArticleFile system capacity
I am using a 32GB SD card, figuring I could expand my file system to whatever size I needed.Then I attempted to go from my current 3GB, 78 percent full, to a 10GB one.Went fine - until DD choked at the...
View ArticleVGA display not working
Hello, I've been the happy user of the UX31-DH52 for over a year now. Just recently, I tried to use the mini-VGA port to no avail. The mini-HDMI port works like a charm, but the mini-VGA seems faulty...
View Articleadditional GPU on Packard Bell
Greetings everyone, I am a new user. I recently bought a new desktop and I am seeking your advice on something. The desktop I bought is the Packard bell bare-bone PC with an Intel core i3 processor....
View ArticleAnybody using Windows XP Professional x64 Edition?
Do I really have to upgrade to Windows 7 or 8.1? Will I lose anything if I don't? I really don't want to waste time learning how to do exactly the same things I already know how to do. I'm not bothered...
View ArticleUnable to update BIOS
Hi, I'm having DH61HO motherboard. My current BIOS version is HOH6110H-0011.2012.0530.1036. When I try to update it to 0012 using Express BIOS update, the computer restarts and upon logon I get a...
View Articleintel hd graphics not found 8.1
Hi. I've bought a laptop packardbell with celeron x64, win 8 32bits, and touchscreen ...ref = easybook ENME69BMP in France (is it baytrail ? ) Since i've upgrade to 8.1 the computer is slow, and in my...
View ArticleWake up from sleep with mouse?
D54250WYK When I put the NUC to sleep with W8 it wakes up in 5 minutes without any input by me. I have tried hibernate in W8 and changed various settings in the Power section of the BIOS, no joy. NUC...
View Article